HongYeJie silicone company

Typical Application of electronic potting compound silicone rubber:   electronic potting compound silicone rubber is suitable for bonded seal of electronic components, power module and control module, which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc. Silicone Rubber Electronic Material for good elasticity is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of  PC(Poly-carbonate),PP,ABS,PVC, etc. and metal materials.   Description of electronic potting compound silicone rubber:   electronic potting compound silicone rubber is a newly insulating material  silicon of silicon compounds. It cures without heat, corrosion and just with little shrinkage.  It can be applied to the sealing and pouring of various electronic components, and then forming insulation system.    Features of electronic potting compound silicone rubber:   1. No toxicity, solventless, no odor and no cure by-product. 2. Equal amount of mixing ratio, good fluidity, easy processing. 3. No significant exotherm or shrinkage during curing. Precaution of electronic potting compound silicone rubber:   1. Twelvemonths from date of shipment when stored at 24C in original unopened packages. 2. This kind of product is nondangerous product, it can be transported as general chemicals. 3. Products exceed the storage life should be confirmed normal before using.   Operation way of electronic potting compound silicone rubber:   1.Put part A and part B in separate container with equal dosage and stir evenly when mixing the two parts together. 2. Put the mixture into the vacuum machine under 0.08 MPa for 5 minutes. 3. The temperature influences the curing time of electronic potting silicone rubber. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. Need any help on silicone rubber, please feel free to contact Ms Sandy: Tel:86-755-89212369 Mob/Whatsapp:86-18938867593 E-mail:hyjw@szrl.net Skype:sandy19385